Tactical Fanboy
Tactical Tailor
Home Categories TacticalFanboy Archives Email

Archive for the ‘SHOT Show’ Category

SHOT Show 2016 – Hydrapak

Tuesday, January 19th, 2016

Hydrapak had a couple of new products to show off at their booth.

DSC07134

The first is the Seeker hydration bladder. The Seeker is a collapsible bladder constructed of the same durable TPU as other Hydrapak products, and it fills from a screw-cap lid. The non-rigid design of the Seeker allows it to fit snugly within a variety of carry options, such as a pack. The Seeker functions well as either as additional storage for water, or as a filter bag.

DSC07138

Also featured on the Seeker is an integrated strap system, which allows the Seeker to be carried or tied down externally. It will be available in three sizes: 1L, 2L, and 3L.

DSC07137

Hydrapak will also be releasing what they call the Arctic Fusion. It’s a bite valve constructed of insulated TPU, which keeps the valve from freezing for up to 1 hr in temperatures reaching -20 F. The Arctic Fusion will be released this Fall.

hydrapak.com

Tactical Fanboy Has Arrived At SHOT Show 2016

Tuesday, January 19th, 2016

  

SHOT Show 2015 – Magpul – Dyed Magazines

Sunday, February 1st, 2015

DSC05305

In case you didn’t know, Magpul introduced the new Sand color for their M3 PMAGs. These new mags are not only stronger than the original black M3 PMAGs, but they’re also much more receptive to water-based dye processes, allowing for a greater range of colors. Over at the Magpul booth, Jon Canipe was kind enough to line up the dye jobs they came up with just in time for the show. I gotta say that the pink came out pretty damn good.

www.magpul.com

SHOT Show 2015 – Maglula – Range Benchloader

Saturday, January 24th, 2015

DSC05324

Maglula’s Range Benchloader is a heavy-duty industrial 30-round loader for most standard .223/5.56 magazines, including aluminum, polymer, and steel magazines. The Benchloader’s design allows users to quickly load up to 30-rounds through its single stroke loading action. Its open design allows for examination of rounds prior to loading, and the design reduces wear on feed lips, prolonging magazine life.

www.maglula.com/product/ar15-m4-pmag-range-benchloader-5-56-223

SHOT Show 2015 – IWI – Galil ACE Line

Friday, January 23rd, 2015

The new Galil ACE line was on display at the IWI booth. Currently chambered for 7.62x39mm, the ACE line has the following features:

– reciprocating left side charging handle
– Modern polymer components for weight reduction
– Full length two-piece Picatinny top rail
– Picatinny tri-rail forearm with built-in, removable rail covers
– Adjustable iron sights with Tritium front sight post
– Accepts all standard AK-47 type magazines

DSC05360DSC05361

This particular variant is a pistol which comes with IWI’s own side folding Stabilizing Brace.

DSC05362

Both this pistol and the side folding Stabilizing Brace variant feature an 8.3″ barrel.

As for upcoming variations of the ACE line, late Summer will see the introduction of the 7.62x51mm ACE, which will consist of two pistols and a full length rifle in multiple barrel lengths, all of which will accept standard SR-25 type magazines. The 5.56 ACE line will be available starting early 2016, and will accept standard AR-15 magazines.

www.israel-weapon.com

SHOT Show 2015 – Gerber

Thursday, January 22nd, 2015

The Vital series was introduced as Gerber’s new introductory hunting line. It consists of multiple tools with replaceable blades, and orange handles and frames for visibility. Tools in the line include the Skin & Gut Knife, Take-a-Part Shears, and Pack Saw.

DSC05511

Gator Premium is an upgrade to the iconic Gator line, which features blades made from S30V steel. The handles of these new knives have a scaly texture very much inspired by their namesake, and they also come with similarly textured sheaths. Only the fixed blade has the metal pommel, although both knives feature lanyard holes. Not pictured are the GH models with a hooked point.

DSC05513

In the image above, you can compare the new Gator Premium Folder CP (top) to the original Gator Folder (bottom).

DSC05514

Here’s the Premium Folder and Fixed knives in their sheaths. This new line is designed and built in Portland, Oregon.

DSC05516

This is the Short Stack. It’s a complete AR-15 armorer’s tool in an extremely compact package. In fact, at the booth it was displayed as fitting inside Magpul MOE and MIAD grips. Rather than unfold in a traditional manner, the tool is held together with a rubber stop as well as magnetically, and each component can be individually separated. It contains the following components:

– Windage elevation sight tool
– Firing pin scraper
– Buffer tube wrench
– Cleaning cable pull handle
– 4mm wrench
– T10 torx
– #0 cross driver
– Bolt carrier & bolt scrapper
– 1/2″, 1/4″, 3/8″, and 3/4″ wrenches

DSC05517

The Span Shotgun tool, which features 12 tools in one solid state, which itself separates into two separate components. It features the following:

– 1/4″ standard bit tip driver
– Bit tip storage
– Torque generating design
– 6 bit tips
– pin punch
– 3x hex wrench
– choke tube wrench
– bottle opener

DSC05520

The Airfoil is a folding knife, with a fine edge, T-shaped thumb studs, and a pocket clip. It’s very light weight at only 2.2 oz., and has a very smooth open action.

DSC05521

The Skyridge is an assisted open knife with a fine edge blade, dual thumb studs, and a pocket clip.

www.gerbergear.com

SHOT Show 2015 – Game Face Airsoft – GFRS Tormentor

Wednesday, January 21st, 2015

DSC05496

The GFRS Tormentor is an electronic AR-15 style airsoft rifle with a built-in pump action spring shotgun. The rifle is capable of semi or full-auto fire, and comes with a 375 round magazine. It features adjustable hop up, and adjustable stock, and Picatinny mounting rail. The shotgun is a spring powered pump action with a metal barrel, 15-shot magazine, and adjustable hop up.

gamefaceairsoft.crosman.com/index

SHOT Show 2015 – Benjamin Airguns – Armada Magpul Edition

Wednesday, January 21st, 2015

DSC05493

The Armada Magpul Edition is a .22 caliber airgun which comes equipped with Magpul MOE accessories, including the stock and pistol grip. The aluminum forend is M-LOK compatible for the use of all M-LOK accessories. The trigger is 2-stage, and adjustable.

Additional features include:

– Compatibility with Mil-Spec AR-15 pistol grips and stocks
– Over 20″ of Picatinny rail space
– Over 30 shots per fill
– Comes with a 10 round rotary magazine
– 3000 psi operating pressure

www.crosman.com/airguns/benjamin-airguns

SHOT Show 2015 – Benchmade – Jungle Bolo & Jungle Clip-Point

Wednesday, January 21st, 2015

IMG_0554.JPG

Designed for brush clearing and similar tasks, the Jungle Bolo and Clip-Point knives are made of 1095 Spring Steel. The handles are orange textured Santoprene, and both blades come with a leather sheath with belt loop.

www.benchmade.com

SHOT Show 2015 – Beretta – M9A3

Wednesday, January 21st, 2015

IMG_0551.JPG

Here it is, the M9A3. The most noticeable change from a handling standpoint is the grip. You can definitely feel the difference between it and the grip on the M9A1. The threaded barrel is also a nice touch. The Civilian/LE model is set to release later this year. Below is the original announcement article, courtesy of SSD.

IMG_0552.JPG

Recently, Beretta has announced the M9A3, the next generation of the M9 US Military Service Pistol. The M9A3 is being submitted via an Engineering Change Proposal (ECP) in accordance with the terms of the current M9 contract.

“The M9A3 represents the next generation military handgun utilizing the best of the legacy M9 combined with proven COTS modifications that increase performance and durability” stated Gabriele de Plano, Vice President of Military Marketing and Sales for Beretta USA. Mr. de Plano added, “After listening closely to the needs of U.S. Army and other Service small arms representatives, we determined the M9, much like its counterpart legacy weapon systems (M4, M16, M240, etc.), was capable of being upgraded through material and design changes. The resulting M9A3 we are offering to the DOD will likely cost less than the current M9 and answer almost all of the Services’ enhanced handgun requirements.”

The M9A3 features:

– A thinner grip
– Removeable, modular wrap-around grip
– 1913 accessory rail
– Removable front and rear tritium sights
– Extended barrel with threading for a suppressor
– 17-round sand-resistant magazine
– Improvement to various small components
– Comes in an Earth Tone finish

www.beretta.com/en-us

SHOT Show 2015 – ASG – CZ Scorpion EVO 3 A1

Wednesday, January 21st, 2015

IMG_0549.JPG

ASG has produced a licensed airsoft version of the CZ Scorpion EVO 3 A1. Developed and manufactured in Denmark using the original CZ CAD 3D drawings, the EVO features an electronic detection system which protects the gearbox from damage, as well as an electronic trigger system for single, 3-burst, and full-auto fire. The EVO also features a built-in low battery detection system, quick change main power spring, ambidextrous controls, empty magazine detection system, and a fully functioning bolt catch for realistic handling.

www.actionsportgames.com

SHOT Show 2015 – X Products – Can Cannon

Wednesday, January 21st, 2015

IMG_0550.JPG

The Can Cannon is a fully assembled AR-15 upper receiver which is capable of launching a standard unopened 12-ounce can of soda up to 105 yards, using standard MIL-SPEC blanks. It is BAFTE approved as a non-destructive device. Future accessories, including a net launcher and dog training toys will soon follow. Available in Black, FDE, and OD Green.

www.xproducts.com

SHOT Show 2015 – S.O.TECH – Road Warrior Bag

Wednesday, January 21st, 2015

DSC05395

The Road Warrior Bag is a general purpose EDC and hygiene bag. Made from 500D Cordura nylon, the Road Warrior features 5 individual compartments designed to carry everything from general hygiene items to batteries and power components.

The front features a Velcro loop panel for ID and morale patches, a transparent window for ID cards, business cards, or luggage cards, and PALS webbing for additional patches. The webbing features integrated shock cord for stowing additional soft items such as a towel.

DSC05400

The main compartment has 10 internal organizing pockets, along with a zippered internal mesh pocket, and a fold out panel with elastic loops for additional items.

Currently available in Black.\

sotechtactical.com/products/road-warrior

SHOT Show 2015 – Standard Manufacturing – DP-12

Tuesday, January 20th, 2015

DSC05392

Following in the footsteps of Kel-Tec and UTAS, Standard Manufacturing has developed their own bullpup pump action shotgun with dual magazine tubes, however unlike the former two shotguns which feature a single barrel that feeds from two tubes, the DP-12 features double barrels. Two shells are chambered with each pump, and the trigger must be pulled twice to fire both barrels. Each tube is capable of holding 7 2 3/4″ shells, for a total capacity of 14+2. The DP-12 is machined from a solid billet of aircraft grade 7075 aluminum, and it features a spring loaded recoil pad.

Distributed exclusively by Cheaper Than Dirt!

standardmfgllc.com/dp-12-instruction-manual

SHOT Show 2015 – American Tactical GSG MP-40

Tuesday, January 20th, 2015

SONY DSC

American Tactical is releasing a .22 LR version of the MP-40. Built to as close as original specs as possible, the .22 MP-40 features synthetic black furniture, adjustable iron sights, and an underfolder stock. It is available with either 10 or 23-round magazines, and limited quantities will come in a handmade pine crate.

www.americantactical.us

SHOT Show 2015 – PTS Syndicate

Tuesday, January 20th, 2015

The PTS Syndicate booth had a strong showing at this year’s SHOT Show, with a wide variety of new products and accessories on display.

IMG_2911

Drop-in pistol grips were on display, available in multiple angles with texturing. Foregrips were also on display, including a stubby grip, and a long KAC-style grip.

IMG_2909

Centurion Arms licensed guns were on display.

IMG_2908

A Gas Blowback Masada will soon be available, and will be compatible with LM4 magazines.

IMG_2907

Perhaps the most exciting upcoming addition to the PTS line is the Gas Blowback PDR-D. Slightly longer than the electric PDR-C due to the gas action, it will also come with a short, ’20-round style’ magazine, although it will also be compatible with LM4 magazines. The PDR-D is set to come out by year’s end.

IMG_2917

Additionally, PTS has their own line of PVC US flag and logo patches, available in a variety of colors.

www.ptssyndicate.us

Be Sure To Stay On Top Of The Latest SHOT Show Coverage From SSD And TFB

Monday, January 19th, 2015

Soldier Systems Daily and Tactical Fanboy will be at SHOT Show delivering news on the latest and greatest straight from the show floor. Both sites will be posting updates throughout the day, and will also be posting updates to their respective Instagram accounts.

instagram.com/solsys

instagram.com/tacticalfanboy

www.tacticalfanboy.com

Tavor SAR – 9mm Conversion Kit

Saturday, February 22nd, 2014

DSC03034

Taken at SHOT Show 2014, these pictures show the 9mm Parabellum conversion kit for the Tavor SAR. The kit comes with everything needed to convert the 5.56 Tavor into a pistol-caliber carbine: a 1:10 twist CHF 17″ barrel, blowback recoil assembly with bolt and carrier, 9mm magazine magwell adapter, 9mm deflector, and 32-round magazine. They also threw in a barrel removal wrench.

DSC03033

Although the kit isn’t currently up on the IWI website, a few online vendors have listings for the kit.

www.iwi.us

SHOT Show – IWI Booth – Kryptek Tavor

Wednesday, February 5th, 2014

DSC03020

www.israel-weapon.com

SHOT Show 2014 Media Day At The Range

Sunday, January 26th, 2014

Range Day Overview Shot Show 2014 (Enhanced) from boo keller on Vimeo.

Thanks to photographer Blind Owl Media, you can get an overview of Media Day at the Range for SHOT Show 2014.

SHOT Show 2014 – Kalashnikov Tribute At The Arsenal Booth

Saturday, January 25th, 2014

DSC03002

Arsenal set up a tribute area for famed AK-47 designer Mikhail Kalashnikov, who recently passed away, at their booth. It included a guest book of sorts where attendees could offer their condolences to the Kalashnikov family.

SHOT Show 2014 – Ads In The Urinals Part Deux

Wednesday, January 22nd, 2014

DSC02924

Cerakote once again secured the urinal ads at SHOT Show, foregoing the (potentially messy) targets, for something a bit more generic.

SHOT Show 2014 – H&K – 50 Years Of The MP5

Tuesday, January 21st, 2014

SONY DSC

One of the more interesting displays at the H&K booth at this year’s SHOT Show, was the 50 Years of the MP5. Contained within was examples of one of the very first MP64 A3s all the way to the modern MP5 MLI.

SHOT Show 2014 – SIG Sauer

Friday, January 17th, 2014

DSC02948

Sig Sauer’s SIG556xi is a highly modular rifle with a 3-position adjustable gas piston system. It is caliber convertible between 5.56, 7.62x39mm, and 300 BLK cartridges, and every major component of the rifle is interchangeable:

556xi

The base model comes with:

– Locking flip-up front and rear sights
– Polymer handguard (compatible with Magpul MOE accessories)
– Swiss side-folding stock
– removable cheek riser
– reversible swing swivel
– Ambidextrous magazine release
– Ergonomic grip with storage
– Swappable charging handle
– Chambered for 5.56/300 BLK
– 16″ barrel

www.sigsauer.com

SHOT Show 2014 – FNH FN 15

Friday, January 17th, 2014

DSC02980

FNH has released their own AR-15 pattern rifles, the FN 15 and FN 15 Carbine. Both rifles feature a hard anodized aluminum, flat-top receiver with M-1913 MIL-STD rail at the 12 o’clock position, with A2-style front sight, and removable carrying handle mount with sights. The barrel for both rifles is button-broached and chrome-lined, with an A2-style compensator and 1:7″ twist, and a 2-piece ribbed hand guard. The AR-style magazine features an aluminum body with low fiction follower.

The FN 15 has a fixed stock with sling mount and storage compartment. The barrel length is 20″.

The FN 15 Carbine has a collapsible, 6-position stock. The barrel length is 16″.

www.fnhusa.com