Axe gun or pistol sword, either option kinda negates the well-known phrase “never bring a knife to a gun fight”.
Archive for the ‘Gun Pr0n’ Category
Axe Gun
Thursday, October 18th, 2012ClearPlex iPhone 5 Screen Protector Vs. .410 Taurus Judge Public Defender
Monday, October 1st, 2012I’ll be 100% honest: the only reason I put this video up is because someone is shooting an iPhone 5 with a Taurus Judge Public Defender, although a screen protector that protects a phone from the impact of .410 shot is intriguing. There’s also this ‘behind the scenes’ video that shows the method behind the madness.
http://clearplex.myshopify.com/
Build Your DDM4 – Daniel Defense
Friday, September 21st, 2012A recent addition to the Daniel Defense website insures you get exactly what you want out of your DDM4 with the appropriately named ‘Build Your DDM4’ feature. ‘Build Your DDM4’ allows you to choose the options you’d like in either a full rifle or upper receiver group. Options include:
*Lower receiver with standard or Geissele Super Semi-Automatic (SSA) Trigger
*Mid-length or carbine gas system
*Three caliber choices – 5.56mm NATO, 6.8 SPCII, and 300 Blackout
*Barrels – 10.3″, 11.5″, 12.5″, 14.5″, 16″, 18″ (NFA rules apply)
*Standard or extended muzzle device
*Bolt carrier group – standard or chrome plated
*Rail systems – Omega, Omega X, AR15 Lite Rail EZCAR, RIS II, MFR
*Sights (optional)
*Grips (optional)
After you’re finished, ‘Build Your DDM4’ not only gives a total price for your design, but also allows you to place an order, save your created rifle as a wall paper, and save the design on the site for future reference (customer registration required).
https://danieldefense.com/
Experimental Bullpup Rifles
Friday, September 14th, 2012This is an image collection of experimental bullpup prototype rifles seemingly based on the AK design or at least chambered for the same 7.62×39 cartridge. At least one of the rifles, the TKB-022, actually existed. It was designed by G.A. Korobov of Tula Design Bureau, itself an arms-designing organization associated with Tula Arms Factory, and never went into full production due to its radical design; Soviet officers preferred the familiarity and reliability of the already proven AK-47 and its variants. Interestingly enough, the TKB-022 has the best barrel length to overall length ratio of most military rifles ever built, and at one point was chambered for an experimental 5.6×39 cartridge that later evolved into the current 5.45×39.
Modern Firearms – TKB-022
9mm Gun Sconce
Friday, August 31st, 2012Looking for an addition to that tacticool man cave you’ve been planning? Then you might feel inclined to pick up a few of these 9mm Gun Sconces. Each Sconce is handmade by being slip-cast in ceramic through plaster molds. The base measures roughly 4″x7″ with a total height of 13″ including the shade and fixture. They come with a matte black top hat shade lined with gold and are already wired for easier installation.
The Gun Sconce is the work of ceramicryan/Loaded Objects Ceramics, who’s work I’ve covered in a previous article.
Drill Gun Power Screwdriver
Thursday, August 23rd, 2012As part of TFB’s ongoing mission of posting info on every product that’s shaped like a firearm that could possibly be found, I present the Drill Gun Power Screwdriver. Billed as “The Ultimate Power Tool For The Ultimate Man”, the Drill Gun is shaped like a 6-shot revolver and features a fully rechargeable battery and six interchangeable bits, which, conveniently, fit into the revolver chambers for safe keeping.
You can order from gadgetsandgear.com.
UNCHARTED 3: Nathan Drake Inspired Gun Holster
Monday, August 20th, 2012Master leathersmith David Vigil has crafted this impressive gun holster for Vigilante Leather, inspired by the one used by Nathan Drake in the PS3-exclusive ‘Uncharted 3: Drake’s Deception’. The design closely matches the in-game model in both metalwork and the dye job used to treat the leather; a model dyed in black with gunmetal-colored metalwork is also available upon request. 8 buckles, 2 to each strap, allow for easy fitting, with an option for custom fitting if required. Additionally, every holster is waterproofed and stress tested, insuring full functionality in any situation. Simply put, it’s a piece that’s usable for way more than just cosplay.
Available in limited quantities from David Vigil on Etsy.
Internet Movie Firearm Database
Wednesday, August 15th, 2012I’m sure you know about the Internet Movie Database, or imdb.com, another one of those internet time sinks that has information on almost every movie ever along with almost every actor ever, the parts they’ve played, etc. Since this is the internet, where just about any damn thing can be found, and copycats are common, somebody made a similar site in the form of a Wiki, but with firearms as the primary focus instead of movies and actors, even calling it the internet movie firearm database. On the site, you can look up what movies, television shows, and video games a firearm has been in, what firearms a movie, television show, or video game has featured, and even what firearms and in what show/movie/video game an actor has used.
It’s pretty exhaustive, which makes games of 6-degrees-of-a-Beretta-92F all the easier to play.
3D Printed AR-15 Lower
Friday, July 27th, 2012HaveBlue of AR15.com has managed to create a working polymer AR-15 lower made from a 3D printer, specifically a mid 90’s Stratasys 3D printer. So far, the lower has been combined with a .22 LR upper, with over 200 rounds fired and no issues. A .556 upper was also used, with some feeding and extraction issues, however according to the creator this upper has also had problems with a standard aluminum lower.
A few other articles I’ve seen on this project have instantly jumped at the chance to (incorrectly) claim people now have the ability to create fully-functional firearms using just a 3D printer, so in the name of truth and fairness, I feel it’s important to mention that only the lower was created with the printer, not the trigger assembly and other required components.
AR-15.com thread detailing the project
SPP-1 Underwater Pistol
Tuesday, July 3rd, 2012The SPP-1 is a Cold War-era firearm of Russian make, designed specifically for use by Soviet Frogmen. It fires 4.5mm steel darts from four individual barrels. The pistol uses a double action firing mechanism and fires each barrel one at at time, with the striker (mounted on a rotating base) rotating to each barrel as the trigger is pulled. Also developed was the Avtomat Podvodnyi Spetsialnyi, an underwater assault rifle that fired 5.66mm darts and was fed using a 26-round detachable box magazine. Of course, the Soviets weren’t unique in their development of multi-barreled underwater firearms: the Underwater Defense Gun Mark 1 Mod 0 and H&K P11 were designed and used by the United States and allied nations for similar purposes.
Hat Tips:
THE ULTIMATE AR-15 MALL NINJA TACTICAL ZOMBIE DESTROYER!
Wednesday, June 20th, 20121 M&P-15, 1 muzzle break, 3 lasers, 4 flashlights, 3 red dot sights, 9 30-round magazines, 1 forward grip bipod, 2 additional laser/flashlights, and 2 additional horizontally mounted magazines = one 100% badass mall ninja zombie killin’ rifle!
GSG STG-44 .22LR Rifle
Tuesday, June 19th, 2012The GSG STG-44 .22LR Rifle was last seen at SHOT 2012, and will finally be available for sale sometime this Summer from American Tactical Imports. Designed to as close to original specifications as possible, the GSG STG-44 weights in at 9.5 lbs. with a 16.5″ barrel for the 25 round variant and a 16.25″ barrel for the 10 round variant (according to the ATI website, a possible typo) and is chambered for .22LR cartridges instead of the much rarer 7.92×33mm Kurz used by the original STG-44. It comes in an WWII-style Amish-crafted Eastern Pine box and will retail for approximately $600. For a plinker it’s a bit pricy, but it’s cool enough to warrant the price, and to be fair it is an import.
Laser Cut Puzzle Firearm
Sunday, June 10th, 2012Laserist on Etsy has created a couple of cool laser cut puzzles that form into models of firearms when completed. Seen above is the Uzi (not shown is the .357 magnum revolver). Their puzzles can take anywhere from a few minutes to four hours to work out, based on their complexity. Also available is a military Humvee and submarine.
http://www.etsy.com/shop/Laserist
LEGO Heavy Weapons
Monday, June 4th, 2012A while ago we posted an article on the book ‘Badass LEGO Guns: Building Instructions for Five Working Guns’, which was an instruction book on making five working fictional LEGO guns. This time, we’ll be focusing on the book ‘LEGO Heavy Weapons: Build Working Replicas of Four of the World’s Most Impressive Guns’ by Jack Street. Unlike the previous publication, ‘LEGO Heavy Weapons’ features plans for models based on actual firearms, specifically the Desert Eagle, AKS-74U, SPAS-12, and the Jungle Carbine, which is based on the Lee Enfield rifle. Like ‘Badass LEGO Guns’, however, the book features detailed parts lists and plans so you can quickly build the LEGO models found inside. Too bad this one doesn’t have a model that takes advantage of a motor for automatic fire. Maybe we’ll see something like that in the next book?
Available from No Starch Press.
Thanks to Tim for the tip!
First Thoughts on the FNS Striker-fired Pistol
Tuesday, May 29th, 2012
The FNS is a 9mm, striker-fired, 17-shot pistol.
|
Right after the 2012 SHOT Show I received a call from a friend about a new striker fired handgun. He directed me to OMB GUNS in Olathe Kansas. It was there that I got my hands on the new FNS striker fired 9mm pistol.
First impressions mean a lot, even in the gun business. I picked it up handled it, and bought it.
Since I have owned the FNS I have now put a little over 400 rounds through it. There have been no stoppages of any kind with every brand of ammo I have shot through it.
I really wanted to like the trigger on this pistol, but I don’t. On my copy the trigger breaks at 5 pounds 13 ounces, for all intents and purposes, 6 pounds, within the spec in the FNS owner’s manual (range from 5.5 to 7.7 pounds). This does not mean that a person cannot LEARN this trigger. I was able to manage it. A really light trigger is a BAD thing to have on an issue law enforcement pistol. In 35 plus years in law enforcement I held a bunch of folks at “gun-point”. When your heart rate is about 180 and that front sight looks like it is attached to a paint mixer you don’t want a light trigger. With all that said, I think the trigger could be brought down to just under 5 pounds and be a bit more manageable.
The FNS 9 ships in a lockable plastic box with three-magazines.
|
I really like everything else. The gun comes in a really decent lockable plastic box with three magazines. The manual is easy to read with good photos. There is a small lock and two interchangeable backstraps, basically a small and a large.
The pistols controls are ambidextrous; the slide stop, safety, and magazine release are located on both sides of the pistol. The ambidextrous controls will assist in streamlining training for agencies.
The pistol is very reliable. It has really good sights; mine is equipped with the factory night sights. The front sight is approximately .130 inches wide by .20 inches tall. The rear sight has a notch approximately .135 inches wide. The rear sight has a “U” shape to the bottom edge. On my pistol the front sight tritium element fits perfectly in that groove and lines up with the rear sight elements. The night sights on my pistol are made by Trijicon.
The magazines are made of metal and have a capacity of 17 rounds in 9mm. The metal magazines are slim making the grip slim. Seventeen rounds of 9×19 allow for less manipulation under dire circumstances.
The main controls (magazine release button, slide release, thumb safety) are ambidextrous, a good thing for agency issue).
|
I like the fact the FNS has a manual safety, it provides options. Keep the safety ON while loading and unloading. The safety does NOT block the slide when it is on. My rule is that I will not carry any handgun “off-body” (in a portfolio or briefcase) unless it is DA/SA or equipped with a manual safety. The safety is small, but workable. It operates like a conventional 1911 safety. There is a red dot for those that are vision dependent to indicate the pistol is OFF-SAFE. Like most modern striker fired pistols the FNS has a drop safety and a hinged trigger safety.
I contacted Neil Davies, of Hornady ammunition, at the NRA show and asked about his company’s latest Critical Duty load for the 9mm Parabellum cartridge. He advised that he would ship some out. The ammo arrived and off to the range I went with the FNS and five different loads.
Even with the heavy trigger I was able to turn in some VERY respectable groups.
AMMO Velocity best 5 shot group
Hornady 124 gr. TAP FPD 1108 fps 2.2 inches
Hornady 135 gr. Critical Duty 1010 fps 2.3 inches
Hornady 135+P Critical Duty 1092 fps 2.4 inches
Remington 115gr. Ball FMJ 1114 fps 2.7 inches
Winchester 127+p+ Ranger 1221 fps 2.1 inches
These were the best of five, 5-shot groups fired with the ammo. I shot from a stable sandbag rest. Several of the groups had four shot clusters that were in the one inch plus range with the fifth kicking it open to two inches. The range was 25 yards.
All of the ammo fed without a single problem. The Winchester Ranger load is a real screamer and street reports attest to its effectiveness. I haven’t shot the 135 grain Hornady ammo into any ballistic gel, but my guess is that it will perform.
I think the FNS would make a great issue sidearm for law enforcement. It would appear that the folks at FNH have listened to the law enforcement consumers and have responded. It is well made (made in the USA by the way) and above all reliable. I haven’t seen an armorer’s manual yet. My guess is that it is pretty simple on the inside. Field stripping the pistol is straightforward and explained well in the owner’s manual.
I’d like a better trigger. Still, it shoots well, it is reliable, and it has great sights. I think it will make a great stock service contender for IDPA competition. It would make a great pistol for the licensed CCW license holder. It’s ready to go.
Rick Staples served 35 years, 5 months and 29 days in law enforcement with a mid-sized city police department. He served in patrol, investigations, warrant service, SWAT, fugitive apprehension and training. His last eight years were spent at the Regional Police Academy as a full time trainer. He has been a “gun-guy” for over 46 years. He started his career in 1973, the “blue steel guns and wooden clubs” era, as he puts it.
S&W M&P Shield: a Review from Texas Gun Talk
Monday, May 28th, 2012
The S&W M&P Shield is one of the hottest and newest pistols on the market as of this article. Available in 9mm or .40 S&W, it’s a continuation of the Military & Police series from Smith and Wesson.
Stats
Manufacturer: Smith & Wesson
Model: M&P9 Shield
Price: $449 MSRP
Caliber: 9mm Luger (9×19)
Capacity: 7 or 8 Rounds 1.5 Stack Magazine
Firing Action: Striker Fired Light Double Action
Trigger: 6.5# Pull Weight
Safeties: Trigger Snag Safety, Plunger Style Drop Safety, and External Safety
Extractor: External Claw
Materials: Polymer Frame, Melonite Coated Stainless Steel Slide and Barrel
The M&P Shield comes with two magazines, a flush fitting 7 round magazine and an extended 8 round magazine for those with larger hands. Even with the shorter magazine I can get a full grip on the gun which is a commonality with the M&P lineup; like the M&P9c. The backstraps, however, are not removable. This no doubt was part of the reasoning for lowering the price point of the Shield.
The pistol features an 18 degree grip angle which many people will feel at home with since it falls between the 1911 and the Glock grip angles. The Shield is also incredibly light, albeit a bit top heavy, which is expected of a polymer pistol. Being a lightweight handgun means it’s that much easier to carry on a daily basis, especially for women who carry in their purses. This handgun appears to have been marketed heavily towards women and newer shooters. The overall dimensions are better suited to women’s hands than the M&P9c and the gun is only available with an external safety. A note on the safety, it’s pretty much worthless. It is inset into the frame to avoid snagging, but that means it’s hard to find and work under stress. I highly recommend carrying this handgun with the safety OFF.
Here’s the Shield compared to my Glock 19 2nd Gen. It has a shorter slide length, but the grip length is nearly the same. The width of the pistol is considerably thinner than my Glock.
For another comparison, this is the Shield compared to a full sized 1911. The 1911 is bigger in every way except in slide width, as one would expect.
Side by Side, M&P Shield, STI Trojan 5.0 (1911), and Glock 19.
Width comparison of the M&P Shield, Glock 19, and STI Trojan (1911). The Glock is supposed to measure 28mm, but the actual frame is wider. I used calibrated calipers to measure the widths.
The M&P Shield features a Melonite coated stainless steel slide and barrel, a polymer frame, and a unique “1.5” stack magazine. It’s not quite a double stack, but it’s staggered considerably more than a single stack. The recoil assembly is a double spring system over a steel guide rod. In smaller pistols the dual rate helps to provide adequate slide velocity to aid extraction while providing sufficient spring rate to chamber the next round and prevent accelerated frame wear. Many people find that these dual rate assemblies help reduce felt recoil.
Typically holster manufacturers are a few steps behind gun makers, but this was not the case for Comp-Tac. They had a model out on the market nearly immediately. A good holster, such as this CTAC from Comp-Tac, makes the M&P Shield disappear and easy to carry. Even compared to my Glock 19 this thing is a cakewalk to carry, and my girlfriend loves it. (It’s her EDC)
So how does it shoot?
The gun shoots really well. Compared to other popular offerings such as the Walther PPS, Kahr CW9, and Ruger LC9 it does a great job of mitigating recoil impulse. The trigger takes some getting used to with the silly snag safety, but conditioning yourself to position your finger on the bottom of the trigger and/or getting an aftermarket model that converts it to a Glock blade style would remedy this. The pull weight is supposed to be 6.5#s but I feel this particular gun is running about the 5# – 5.5# range.
The sights are nice, easy to line-up and track, but after some mileage the front sight is going to be duller than the rears and that’s going to distract your eyes away from the front sight. Just a downside to 3-dot systems, but you could always black out the rears.
Accuracy is great, it’ll hold a 1″ group at 7 yards all day if I do my job correctly. Typically the gun is physically capable of supreme accuracy, but the short sight radius tends to make the longer shot dispersion increase with a human behind it. The light weight also makes the gun a bit less accurate with a human behind it, dropping the pull weight would help immensely, but I wouldn’t really recommend it for a carry gun. Especially with the vague feel of the OEM M&P trigger.
I had bought this gun for my girlfriend to carry, but I find myself wanting to steal it or get one of my own. It’s a really great little pistol, and I’m not even a big fan of small guns.
Inexpensive rifles
Monday, May 28th, 2012How about a bullpup configured Walther WA2000 in .300 Winchester Magnum (or 7.62 NATO back then) for about $75,000? They were only $12,500 when they came out 25 years ago. What are some of the most expensive weapons you’ve seen? (For a single user, I mean, not like a MK19 or whatever.)
Big Dub Orders Dueling Pistols
Wednesday, May 23rd, 2012Big Dub is rumored to have special ordered a set of dueling pistols for his personal use and that of the occasional shaved gorilla running amok. That’s the rumor, anyway…it may just be a base canard perpetrated about him by the Mad Duo.
Whatever the truth, I want one of these.
For more about Big Dub, follow the Tactical Tailor Facebook page, with which he is somehow involved.
Updating the Shrike
Wednesday, May 16th, 2012Ares is updating their Shrike, a short-stroke tappet gas piston system weapon with an interchangeable barrel system very similar to the M249 and other LMGs. This is essentially another announcement to the previous ARES-16 AMG which has already been available for a while. Features include a folding side charging handle, gas piston system and various railed topcovers.
“We have spent countless hours refining and perfecting the SHRIKE design, ultimately leading to the unique offering available today,” said Geoffrey Herring, President of ARES Defense Systems, Inc. “Our research and development team is confident that the mission-configurable [ARES-16 AMG] delivers on our promise of an innovative weapons system that will exceed the performance standards required by users in the field.”
“The innovative SHRIKE 5.56 upper receiver is designed to fit any MIL-SPEC quality AR-15/M16/M4-type lower receiver and features a dual-feed system, allowing users to configure the SHRIKE 5.56 from magazine to belt fed in seconds without modification to the lower receiver. Created for the tactical professional and the modern sportsman, the SHRIKE 5.56 offers unrivaled functionality and compatibility to meet the needs of any mission.
Durable, lightweight and user-friendly, the military-grade SHRIKE 5.56 provides tactical professionals and sportsmen alike with the firepower of a U.S. M249 Squad Automatic Weapon (SAW) at nearly half the weight of the current SAW. The dual-feed design of the SHRIKE 5.56 accepts standard 30-round M16 magazines and M27-linked SAW ammunition in 5.56 x 45mm NATO (.223 REM), and fires at a rate of 625 to 800 rounds-per-minute. Furthering its usability, the SHRIKE 5.56 features a quick-change barrel that allows the user to swap barrels in less than three seconds, and the self-regulating gas-piston system is cleaner and more reliable than the legacy direct-gas system.”
More at http://www.thetacticalwire.com/story/259893 or http://www.guns.com/ares-defense-updates-their-shrike-the-ar-upper-that-uses-magazines-and-belts-7820.html. Check ’em out on Facebook at https://www.facebook.com/aresdefense.
Shooting D.O.P.E.
Saturday, May 12th, 2012Ryan Cleckner covers how to gather and organize D.O.P.E. (Data On Previous Engagements) and how to organize this information to make it readily available in the field. (NSSF Video)
Want a Big Package?
Saturday, May 12th, 2012Not that sort of big package.
THE LEWIS MACHINE & TOOL “PIG PACKAGE” .308 MODULAR WEAPON SYSTEM NOW AVAILABLE…or so we hear.
Brian “Pig Man” Quaca, Host and Executive Producer of the Leupold’s “Pig Man: The Series” Television Show on the Sportsman Channel, have endorsed the LMT® .308 Modular Weapon System
“I knew straight out of the gate that LMT® folks were serious players,” Brian Quaca commented. “These are the weapons residing in the hands of our US men and women on the front lines across the world, and if it’s dependable and accurate enough to defend our freedom, I have no hesitation dusting a few dozen pigs with it in the field.” The Brian “Pig Man” Quaca story plays out on the Sportsman Channel where his rough and tough hunting lifestyle entertains viewers with a different take on a traditional hunting television show.
Leupold’s “Pig Man: The Series“, The Sportsman Channel
Look for Pig Man with his LMT® .308 Modular Weapon system broadcast into 30+ million homes across the country every Tuesday at 2:00 a.m. CST, Thursday at 6:30 a.m. CST, Friday at 11:00 p.m. CST and Sunday at 12:30 p.m. CST and 9:00 p.m. CST.
Daewoo K11 Explodes (that’s a dammit)
Tuesday, May 8th, 2012Courtesy of The Firearm Blog
A Korean news website has revealed that in October last year a S&T Daewoo K11 exploded after one of its 20mm grenades was prematurely detonated. The soldier who was operating the gun suffered cuts on his hands and face. Ironically another problem with the gun, the poor lethality of the small 20mm grenades, saved the solider life.
The Korean Department of Defense attributes the problem to electromagnetic interference from the Fire Control System. Reading between the lines, it sounds like it may have been a software bug with the FCS.
I am troubled that it was even possible for the grenade to detonate. The grenade it supposed to be spin-armed, ensuring it has been fired a certain distance before detonating. Maybe a bug in the software (either on the grenade or on the FCS or both) allowed the grenade to be armed at a distance of zero, allowing it to be detonated in the barrel.
Flipping With Guns
Thursday, May 3rd, 2012Steve Fisher running a Legion rifle
Tuesday, May 1st, 2012
Here’s Mr. Steve Fisher of Magpul Dynamics, giving a rundown of the Legion Firearms LF-15D with their hexagonal barrel ‘honeycombing’ and assorted furniture. Here’s some more information on the hex-fluted barrel, http://kitup.military.com/2012/03/hex-fluted-rifle-barrels-whys.html, and here’s more about the basic rifle. http://soldiersystems.net/2012/01/04/legion-firearms-lf-15d/
Good stuff, good shootin’.
Reflex Sights from Rapid Reticle Half Off on WOOT
Saturday, April 28th, 2012PFI has partnered with WOOT to sell their SOPS-33M Reflex Sight at half MSRP to “get more of [their] scopes into shooters hands”. The SOPS-22M is an excellent red-dot optic with an established reputation. It’s built to mil-spec standards, will not lose zero (due to its steel drop-drum turrets), features an auto-brightness/off setting so you don’t have to adjust brightness in different conditions, and has two nightvision settings. Check it out.
Here’s the designer talking about it (pay no attention to the music):
“The SOPS-33mm sighting system is the most advanced sight of its kind available. It has the standard light intensity settings (1-8 manual), but this is where it leaves the rest behind with 2-night vision settings to be used with night vision equipment, and a special “Auto” feature that automatically adjusts the intensity to the environment’s ambient light due to the proprietary photo cell. This scope was designed and built to PFI’s rigid specifications and can take a beating that others won’t. The scope comes with two standard low mount 33mm rings, a flash kill filter, flip up caps, covered target turrets, and heavy duty windage and elevation adjustments that will never leave zero. Also available is the PFI-QRR quick release mount that is designed especially for this system for fast mounting and dismounting in the field.”