The Umarex T.A.C. is an air pistol that converts into a carbine using the included frame. It’s chambered for .177 caliber pellets with a 19-shot capacity and is powered by a single 12g CO2 capsule housed in the grip. With a 4.25″ barrel the T.A.C. is capable of a velocity of 410 FPS. In addition, with the use of adapters, the HK USP (Airsoft & BB), SW MP40 BB, Umarex XBG, Combat Zone Enforcer, and Walther P99 DAO Airsoft can use the T.A.C. carbine frame.
The SRM 1216 is a semiautomatic shotgun that uses a unique 16-round detachable magazine made of four individual 4-round magazine tubes that the operator rotates as needed, referred to as manual index. The 1216 offers ambidextrous controls as the charging handle, bolt release, safety controls, ejection port, and sling plate are all configurable to a left or right position. Top mounted picatinny rails allow for the attachment of sights and other accessories. An interchangeable bolt allows for the use of both lethal and less than lethal ammunition.
The FNX-45 Tactical is an update on the FNP-45 Tactical pistol. It features a polymer checkered frame with interchangeable backstraps, a serrated trigger guard, and picatinny accessory rail. The stainless steel slide features an external extractor with loaded chamber indicator, front and rear cocking serrations, and two mounting bases for the use of an electronic red dot sight. The barrel comes threaded for the use of suppressors or compensators, and all the controls are fully ambidextrous (decocking/safety lever, slide stop, and mag release). If you’re wondering what’s ultimately different between the FNP-45 and FNX-45 aside from a few improvements and aesthetic changes, the later uses a new magazine which is incompatible with the former model. To offset this a bit, a new FNX-45 comes with three 15 round mags.
The FN M3M, designated as the GAU-21 by the US Navy, is chambered for .50 BMG and fires at a rate of 1100 rpm using an open-bolt operation and a dual recoil buffer system. The effective range of the M3M is 2500 meters (approx. 1.5 miles) with a maximum range of 6500 meters (approx. 4 miles). It operates independent of either electrical or hydraulic power sources and has a unique soft mount system that enhances accuracy and minimizes recoil forces transmitted to the airframe. The M3M been approved by the DoD for use with all branches of the military as the Common Defense Weapon System for all current and future rotary-wing aircraft.
If it’s blue, it must be a training gun, right? Well, that thought process would be completely correct in regards to the MP7A1 UTM. It’s a specially modified variant of the famed PDW that’s designed to use non-lethal ammunition made by Ultimate Training Munitions.
At trade shows I always have my camera out, as evidenced by these two pics I took while in the restroom at SHOT. Cheers to Cerakote for their creative use of advertising space…
Magpul had a great showing of brand new products at this year’s SHOT, including the VW ‘Battle Bus’ they had on display at their booth.
They’re expanding their line of shotgun stocks and fore-ends to include Mossberg shotguns.
They’re releasing accessories and parts in their new color ‘Ghost Gray’.
They’re doing Gen M3 versions of their 7.62 magazines, in 25, 20, and 10 round models.
Finally, they’ll soon be releasing magazine round limiters and Ranger Plates for the Gen M3 magazine.
The UTS-15 is a shotgun by Turkish firm UTAS that in many ways is an update on the Neostead 2000 shotgun, with its bullpup design, dual tube magazines located above the barrel, and ability to alternately feed from both tubes. It’s constructed largely from polymer, with the bolt, barrel, and flash suppressor machined from 4140 steel. It features an AR-15 style manual safety switch, and the integrated top mounted picatinny rail allows for iron sights and/or optics. An optional fore-end integrated light/laser combo can be added to the UTS-15. The UTS-15 is chambered for 2 1/2″, 2 3/4″, and 3″ magnum shotshells. Features an overall length of 28.5″ with a weight of 6.9 lbs. As an added note, UTS-15s sold in the USA are manufactured in Des Plaines, IL.
First Spear, along with Renegade Armor, Wilcox, and Aimpoint, sponsored a media range day at the Las Vegas metropolitan police department firing range. Three ranges were set up, with the first two featuring rifles by H&K and LMT, and pistols by Nighthawk Custom and SIG Sauer. The third range featured something a bit more exotic: rifles by FERFRANS, who are known for their Delayed Sear Activation System. This system made the 7.5″ 5.56 SCW PDW very controllable when fired in full-auto. It’s also very likely this system was responsible for reducing the felt recoil of the 7.62 SOACR near 5.56 levels. Wilcox also had demonstrations of their breaching torch technology; seeing the torch used to melt through rebar as quickly as it did was impressive. Overall, it was a great media day that offered the chance to try out some truly fantastic firearms.
If the many thinly-veiled threats directed at myself through email, phone calls, and the flaming bags of poo at my doorstep are any indication, this article has been a long time coming.
I spied this pair of Chris Costa action figures hanging around the Nighthawk Custom booth. He comes equipped with an Arc’teryx beanie and pant, Costa Ludis long-sleeve t-shirt, custom Nighthawk 1911, and other real-world gear. Also, notice how the figure sitting on his imprisoned twin’s plastic case is rocking MultiCam pants and boots. A limited variant, perhaps?
http://www.nighthawkcustom.com/
http://caltekonline.com/index.php
http://costaludus.com/
Leupold is the latest company to jump into the Zombie market with their VX-R Zombie Riflescope. Based around the VX-R Patrol Scope, the VX-R Zombie has a few unique features that cater to its namesake. For starters, the power on switch is green, along with the scope’s illumination dot. The scope caps feature Zombie imagery on the inside, and the two included BDC dials are designed specifically for use with .223 REM and .308 WIN Hornady Zombie Max ammunition. The VX-R Zombie will retail for $599 with a limited production run.
http://www.leupold.com/
DTS is one of the first companies who’s products I wrote about, so I had a personal obligation to see what they had to offer at this year’s SHOT Show. It turns out they’ve added more than a few new items to their line of training weaponry, including a butcher knife, kitchen knife, fireplace poker, and two color variants of a campfire hatchet, in brown and red. Additionally, they’ve finalized the design for the broken wine bottle from the prototype seen last year.
DTS Tools are designed to mimic many of the improvised weapons that LEOs can possibly face in the line of duty. They are built with a polymer insert designed to minimize impact and enhance safety and are surrounded by a lightweight, high quality, impact resistant rubber exterior, rated for temperatures ranging from -13F to 125F.
Hazard 4 had an impressive showing of new bags, apparel, and accessories at this year’s SHOT Show.
Poncho Villa
The Poncho Villa is made from a water-resistant, breathable softshell fabric with 100% waterproof seams throughout. It has large Velcro panels on the front and back for agency identification, as well as smaller panels on the shoulders and head-back. Large perimeter grommets allow the Villa to be hung as a tarp. A generous fit easily encompasses packs, bags, head wear, and other gear, and side snaps and a front to chin zipper allow the wearer to close the edges and neck in severe weather. The entire poncho fits into its own vented front pocket for storage.
Colors: Coyote/Black
Two new products on display at EOTech’s booth attracted my Fanboyish tendencies. The first was the MW3 Holographic Hybrid Sight II. The MW3 sight is composed of the EXPS2-2 holographic sight with 2-dot reticle combined with the G33.STS magnifier. The MW3 logo is clearly displayed on the side of the EXPS2-2. Like other kits in the Hybrid Sight family, the Quick Switch to Side (STS) mount allows the operator to disengage the magnifier with a simple lever flip, then snap it back into place as needed.
The other product is the XPS2-Z Zombie Stopper Holographic Weapon Sight. The main feature that differentiates this sight from the standard XPS2 is the use of a biohazard symbol as the target reticle, which features a 65 MOA ring with a 1 MOA aiming dot. The reticle is also displayed on the top of the sight in white instead of red. Additionally, the final product will feature a stylized Zombie Stopper logo on the side of the sight. At the very least, it’s a relatively unique concept; no other company, to my knowledge, has done a zombie themed reflex sight with a biohazard reticle before. It’ll be available in April of this year with an MSRP of $559.
The MKA 1919 is a Turkish made 12 ga shotgun imported by RAAC. It’s modeled on the AR-15 platform in both appearance and the location and function of the safety and magazine release. The model I tried at Media Day was a variant modified for competition purposes. It features a flat upper receiver with an EOTec sight, collapsible stock, modified barrel and choke, replacement pistol grip, enlarged charging handle, and enlarged mag release. Additionally, it also had a 10-round extended magazine. It’s dubbed the ‘Zombie gun’, due to its paint job.
Despite being chambered for 12 ga shells, it was practically recoilless. Definitely a good choice to consider of you’re looking for an accurate and comfortable semi-auto shotgun.
The basic model is imported by RAAC.
The MKA 1919 is a Turkish made 12 ga shotgun imported by RAAC. It’s modeled on the AR-15 platform in both appearance and the location and function of the safety and magazine release. The model I tried at Media Day was a variant modified for competition purposes. It features a flat upper receiver with an EOTec sight, collapsible stock, modified barrel and choke, replacement pistol grip, enlarged charging handle, and enlarged mag release. Additionally, it also had a 10-round extended magazine. It’s dubbed the ‘Zombie gun’, due to its paint job.
Despite being chambered for 12 ga shells, it was practically recoilless. Definitely a good choice to consider of you’re looking for an accurate and comfortable semi-auto shotgun.
The basic model is imported by RAAC.
